Hi Nikita,
In your example,
Width of line type L3 = 7cm
Total table width = 2cm (value in 'Width' to left of 'Table Painter' button)
Suppose you are defining 2 columns of 1cm each, you will be specifying as
Cell/Column 1; Unit; Cell/Column 2; Unit
1 cm 1 cm
'Width of line type' would be 1cm+1cm = 2cm
Since there is only 1 column, it should be specified as
Cell/Column 1; Unit
2 cm
'Total table width' always remain the same as you specified.
You will have to manually change it if you need to increase it.
Incase you need to fit a wider text, increase 'Total table width' to 7cm
Cell specification can remain as is.
Cell/Column 1; Unit
7 cm
'Width of line type' = Sum of Width of individual cells/columns
And it should be always equal to 'Total table width'
Regards,
Nisha Vengal.